Monday, 25 April 2022

Pendulum Construction

›
 Some time ago I published a couple of posts about the clocks Pendulum, firstly a Simple Pendulum and then another post about the more compl...
Thursday, 24 February 2022

Daisy wheel motion for clocks Hour Hand

›
 A clock's Minute hand rotates once for each hour and the Hour hand rotates once for every 12 hours, so a ratio of 12:1 reduction is req...
2 comments:
Friday, 14 May 2021

The woodenclocks weight drive - Alternative designs.

›
 Wooden clocks are driven, in the main by a single drive weight hung from a cord wrapped around the Drum, and it is this type of drive that ...
Monday, 21 September 2020

A design for a Minute engine

›
 I have tried on several occasions to design a wooden clock with a Swiss Lever Escapement, but so far none has been really successful. The p...
4 comments:
Thursday, 14 February 2019

A chart for discovering Woodenclocks features.

›
There was a time, not so long ago when I could remember the details of all my clocks, but sadly there are now so many that it becomes progr...
4 comments:
Thursday, 8 February 2018

How to cut Clock Frames on a smaller CNC table.- Part 2

›
In the previous post I looked at 4 ways to in which you could cut profiles that were longer than the working area of your CNC machines table...
1 comment:
Thursday, 1 February 2018

How to cut Clock Frames on a smaller CNC table.

›
For several years I worked with a CNC machine that had a small 400mm x 250mm working area, not anymore, now I have a Stepcraft 600 with 600m...